Screen wiper of back glass
The screen wiper of back glass joins if you wring out the lever switch of a screen wiper in the direction of the dashboard. At the same time the windscreen washer pump turns on, and later certain time water pours out from a nozzle. By short pressing the switch the faltering operating mode joins. For its shutdown it is necessary to press the switch once again. The plug 53 powers the screen wiper engine, current of the plug 53a returns brushes in a starting position.
Removal of the engine of a screen wiper of back glass
|
- To remove the screen wiper lever.
- To turn out a nut on an axis of a screen wiper and to remove it together with an insert and sealing laying. To postpone details in sequence of removal.
- To remove a covering of a back door.
- To pull together a windscreen washer hose from the screen wiper engine.
- To turn off the holder of the engine of a screen wiper of back glass and to remove it together with the engine.
- To separate the multicontact plug.
- To remove the engine from the holder.
- At installation of the new engine to allow it to reach a starting position in the way described for the engine of a forward screen wiper.
- To fasten the screen wiper lever.
- The brush of a screen wiper has to be at rest at distance of 40 mm from bottom edge of back glass.
|
|
|