- The lamp does not burn at the tightened emergency brake: to check a safety lock.
- To remove and check the glow lamp.
- If it did not lead to success, to release the switch behind at the lever of turning on of the parking brake, to disconnect a wire from the switch (behind near the lever) and to bring the plug to the bared metal.
- If the lamp lights up now the switch is, so faulty.
- The lamp does not die away at the removed parking brake: to disconnect a wire from the switch of the parking brake as it is described above, but to leave the plug to be groundless.
- If the lamp dies away, so the switch is faulty or installed incorrectly.
- If it continues to burn, so the cable somewhere frayed and there is a short circuit on "weight".
|
|