Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car

Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ System of injection
- Coupling
   Drive of management of coupling
   Coupling service life
   Coupling check
   Check of the hydraulic drive of coupling
   Coupling removal
   List of malfunctions
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications

Drive of management of coupling

Coupling and drive of management of coupling

1 – the conducted disk;
2 – press disk;
3 – vyzhimny bearing;
4 – coupling switching off coupling lever;

5 – the directing plug of the vyzhimny bearing;
6 – working cylinder of coupling;
7 – main cylinder of coupling;
8 – coupling pedal.

Force which we apply when pressing a coupling pedal, has to be transferred to the vyzhimny bearing. It occurs in Audi 80 hydraulically – as in brake system. While you press on a coupling pedal, the piston in the main cylinder (on a coupling pedal) squeezes out a certain amount of liquid to the working cylinder (on a transmission). There the piston acts from the cylinder a little and via the lever of switching off of coupling sets in motion vyzhimny the bearing.