Audi 80/Avant + Technical specification + Engines + System of production of the fulfilled gases + Cooling system - Fuel tank and fuel pump Fuel tank Fuel level sensor Fuel accumulator Fuel-supply line Fuel pump Replacement of the fuel filter + Air filter and airintaking channels + System of injection + Coupling + Transmission and transmission + Suspension bracket and steering + Brake system + Anti-blocking system of brakes + Wheels and tires + Body electrical system + System of ignition + Lighting + Signalling devices + Devices and auxiliary devices + Heating and ventilation + body Elements + Search of malfunctions + Specifications
|
Fuel pump
At all versions of Audi 80 engines the fuel pump with the electric drive is installed in the case of a toplivozabornik located below in a fuel tank. He receives electric food via the relay of the fuel pump. It is necessary to mention the shutdown of the battery containing in the control unit of system of ignition/injection which ensures functioning of the pump only when the engine works.
Shutdown of the battery has to prevent ignitions because of the fuel which flowed out as a result of accident or road accident.
Search of malfunctions of the fuel pump
|
It is so possible to check, whether the fuel pump gives fuel: on a socket place at the left near a shock-absorber rack (here it is shown on the example of the car with system of injection of KE-III-Jetronic) to disconnect the fuel bringing pipeline (2). (1) to put on a hose the bringing pipeline and to lower the free end in any capacity. 3 – fuel drain pipeline; 4 – the ventilating pipeline from a fuel tank to a tank with absorbent carbon. |
|
- First of all to check a safety lock (the head the Body electrical system).
- If it as it should be, it is necessary to look for further:
- Sometimes it is possible to establish by listening, whether the fuel pump works: to listen under the car at height of a fuel tank, whether the fuel pump while the assistant includes ignition turns on.
- If the work sound is audible, the pump probably is serviceable. If it was audible nothing, it is necessary to check, whether fuel arrives:
- Models with the 4-cylinder engine and system of injection of Mono-Motronic: to disconnect the tube conducting to the block of preparation of gas mixture in a place of nipple connection. To put on the hose proceeding from a fuel tank, the extender and to lower its end in any capacity.
- The assistant has to include a starter at this time. Now fuel has to arrive.
- Models with the 4-cylinder engine and system of injection of Digifant: to disconnect the bringing pipeline ahead on the distributive pipeline, to put on a hose extender and to lower the free end in any capacity.
- The assistant has to include a starter at this time. Now fuel has to arrive.
- Models with the 5-cylinder engine and system of injection of KE-III-Jetronic: To weaken screw connection on the bringing fuel-supply line – to keep in readiness a rag to clean the following gasoline.
- Even at the idle engine a little gasoline because the fuel supply system is under pressure thanks to the fuel accumulator now has to act.
- If appears nothing, the assistant has to include a starter.
- Now the fuel pump has to start giving gasoline.
- All models: if moves nothing, it is necessary to check the multicontact plug above on a protective flange of a fuel tank and to find out, whether power supply receives the pump:
- To turn off a rug of a luggage compartment.
- To remove a black metal cover.
- To remove the multicontact plug.
- To check volmetry or a control lamp, whether there is between shtekerny contacts 1 and 4 (a brown and greenish-yellow wire) tension approximately in 12 Century. It is necessary for measurement that the assistant included a starter (the transmission lever in neutral situation, the car on the parking brake).
- If the pump does not work, despite receipt of food, so it is faulty (to remove and replace).
- If food does not arrive, under suspicion the pump relay in the central switchboard gets. Its check is described in the head "Body electrical system".
- Can be other reasons: defective conducting to the relay or the pump, the hammered or bent fuel-supply line hose, the hammered filters of rough cleaning or the fuel accumulator.
|
|
Removal of the fuel pump
|
On the example of this opened fuel tank it is shown how the fuel pump is removed. However the special tool (1) which turns internal part of the case (a toplivozabornik 2) a little to the left is for this purpose necessary. The tool has to get the paws (arrow) to dredging on internal part. |
For installation of the fuel pump (1) with internal part of the case of a toplivozabornik (2) in external part (3) it is necessary to observe the correct provision of installation: on the front-wheel Audi models the mark in internal part of the case of a toplivozabornik has to be opposite to a mark in external part (shooters on the left illustration). On the all-wheel drive Audi model the double mark in internal part of the case of a toplivozabornik has to settle down opposite to a mark in external part (shooters on the right illustration).
It already belongs to those types of works which the workshop because the fuel pump is taken out together with internal part of the case of a toplivozabornik has to carry out, and it can be taken out from external part of a toplivozabornik only by means of a special key 3307. The one who can hire a similar key, has to act as follows:
|
- To remove the multicontact plug.
- To squeeze fixing plates on a tip of the drain pipeline and to remove a hose.
- To turn off the giving fuel-supply line.
- To turn off a plastic cap nut. As a rule, she sits very densely. Therefore it is necessary to take perhaps more stupid screw-driver, to put it to one of edges of a nut and to weaken a nut easy percussions by a hammer on a screw-driver handle core. If necessary to repeat on other sides.
- Now it is possible to raise a protective flange of a fuel tank a little.
- On inside of a protective flange (as well as outside) to squeeze fixing plates on a tip of the drain pipeline and to extend a hose down.
- To disconnect the plug from the fuel sensor.
- To establish a special key 3307 on inside of the case of a toplivozabornik and to turn it to the left against the stop.
- To take out the fuel pump with internal part and a protective flange from a tank.
- Precisely to remember (to note) the provision of installation of the pump, tubes, wires and bandages of wires because at installation all elements again have to be collected precisely in the same look.
- After a detachment of the delivery pipeline (situation at installation) it is possible to disconnect the fuel pump from internal part of the case of a toplivozabornik. It occurs differently depending on pump option:
-
60-millimetric pump: to turn on the left the grid located below on inside of the case of a toplivozabornik to take out the fuel pump. At installation the ledge sideways on the pump has to enter a groove. To watch a sealing ring.
-
40-millimetric pump: to squeeze a blocking bracket above on internal part of the case of a toplivozabornik, to take out the pump. At installation the pump can be put only in one situation.
- It is necessary to pay attention: at the front-wheel Audi 80 models the mark in outer side has to be opposite to an unary notch (mark) in inside. At all-wheel drive models it has to be opposite to a double notch.
- Again to tighten internal part by means of a key 3307. To establish other details.
- The provision of a protective flange at installation: the arrow on a flange has to be opposite to a mark in a fuel tank.
|
|
|
|