Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
- System of injection
   - System of injection of Mono-Motronic
      Operating procedure
      Malfunctions and independent diagnostics
      Independent repair
      Visual check
      Check of separate elements
      Check of the mode of idling and analysis of exhaust gases
      Check of catalytic converter and lambda probe
      Hummock drive of "gas"
      List of malfunctions
   + System of injection of Digifant
   + System of injection of KE-III-Jetronic
   + Systems of injection of MPI and MPFI
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications





Independent repair

Type of the block of preparation of gas mixture of system of injection of Mono-Motronic at the removed air filter

1 – pressure regulator;
2 – the connecting plug for a nozzle and the sensor of temperature of the arriving air;
3 – connecting plug of a potentiometer of a butterfly valve;

4 – nozzle;
5 – the sensor of temperature of the arriving air.

Many inspections of system of injection, unfortunately, cannot be carried out because of lack of devices, necessary for check, at home. But nevertheless there is a certain field for activity.

The control unit cannot be checked "house" means. But from practice it is known that malfunctions arise very seldom here.

Much more often sensors, switches and cable connections give a reason for claims. Therefore at the found malfunctions the following operations procedure is recommended:

 PERFORMANCE ORDER

  1. To establish that ignition as it should be.
  2. To check supply with fuel.
  3. To carry out a visual inspection of elements of system of injection.
  4. If thus malfunction was not found, to see the list of malfunctions at the end of the head and to check the store of malfunctions in a workshop, to check the suspected detail according to the specified scheme.

 Help: at an injection system crash at first check safety locks No. 13, 21, 25, 27 and 28. Passes all food of system of injection of Mono-Motronic through them.