Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car



Audi 80/Avant
+ Technical specification
+ Engines
- System of production of the fulfilled gases
   Check of a suspension bracket and condition of system of production of the fulfilled gases
   Replacement of system of production of the fulfilled gases
   Removal of separate elements
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ System of injection
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications





Check of a suspension bracket and condition of system of production of the fulfilled gases

The system of production of the fulfilled gases is strengthened on a transmission. Under the car bottom it is fixed freely on rubber pillows.

 PERFORMANCE ORDER

  1. To check rubber pillows for wear, the fragmentary or damaged pillows – to replace.
  2. To check an inhaling of bolts on a final collector (35 N • l) and on a transmission arm (25 N • l), but thus not to use excessive force.
  3. At the working engine to close a final tip(s) of an exhaust system a rag, holding it in hand. Later short time the engine has to decay.
  4. If you hear the hissing sounds and the engine continues to work, so an exhaust system in that place, these sounds from where reach, is not tight.
  5. Lower rumble of work of system of production of the fulfilled gases, than usually, and loud cottons at the movement by a setup indicate the rusted exhaust pipes.
  6. Mufflers start rusting on places of welding (connection). If they have to keep still any time, should not collapse from easy percussions by a screw-driver.