Electric regulation of external rear-view mirrors
Both mirrors are regulated by the switch in an armrest of a driver's door. Besides, the surface of mirrors is warmed if heating of back glass is included. (With mechanical regulation) you will find more detailed information on mirrors in the head Elementy of a body.
If at inclusion of adjustment of mirrors they do not move:
|
|
- At first it is necessary to check a safety lock.
- Then to remove the switch (see above in this chapter) and to check it according to the scheme (which is also provided in this chapter).
- If the switch as it should be, it is necessary to remove a mirror that there were available connections of the regulating engine (the head Elementy of a body).
- Whether tension at the included ignition and pressing of the switch to contacts of the engine arrives, whether connection on "weight" is correct?
- If the answer is positive, malfunction is covered only in the engine. Unfortunately, it cannot be got separately, but only complete with a mirror.
- However it is temporarily possible to adjust a mirror a hand.
- At idle heating of a mirror it is necessary to check according to the corresponding electroscheme a way of current from the switch of heating of back glass.
|
|
|