Audi 80/Avant (B4)

since 1991-1995 release

Repair and operation of the car



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ Cooling system
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ System of injection
+ Coupling
+ Transmission and transmission
- Suspension bracket and steering
   Control of a condition of a casing of the steering mechanism
   Check of dustproof covers and side play of tips of cross steering drafts
   Check of dustproof covers of hinges of a forward suspension bracket
   Check of a side play of a steering
   Check of a maple or poliklinovy belt
   Check of level of working liquid
   Check of a side play of the bearing of a nave of a wheel
   Shock-absorbers
   List of malfunctions
   Adjustment of corners of installation of wheels
   Measurement of adjustment of corners of installation of wheels
   List of malfunctions
   Repair of a running gear and steering
   Repair of a forward suspension bracket
   Repair of a back suspension bracket
   Steering
   Repair of a steering
   List of malfunctions
   Adjustment of the steering mechanism
   Filling with liquid and pumping of a hydraulic system of the power steering
   Safety cushion
   Requirements of safety measures
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrical system
+ System of ignition
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications





Filling with liquid and pumping of a hydraulic system of the power steering

The system of a steering needs to be filled and deleted from it air in case separate elements of hydraulic system were replaced and therefore working liquid merged.

 PERFORMANCE ORDER

  1. To clear the filter in a tank with gasoline for washing of details.
  2. To pour new working liquid before marking of "max". Old liquid cannot be applied more.
  3. To lift the car in front from both parties and at the switched-off engine to turn management several times from an emphasis against the stop.
  4. To add liquid to a mark of "max".
  5. To start the engine and to watch thus liquid level: if at start of the engine level goes down, to put wheels in direct situation and to add liquid until level constantly is not at a mark of "max". Also at a wheel provorachivaniye in a tank there should not be air bubbles.
  6. After a short trip to check liquid level.

Removal of a steering wheel

Models without safety cushion

Here removal of a steering wheel at the cars which are not equipped with a safety cushion is described.

 PERFORMANCE ORDER

  1. The sharp movement by hands to remove the button of a sound signal in the middle of a steering wheel.
  2. To put a steering wheel in the blocked situation.
  3. To weaken a nut of a steering column a replaceable face head of 24 mm.
  4. To put forward wheels precisely in direct situation, so that spokes of a steering wheel were symmetrically.
  5. To remove a nut and a podkladny washer, the sharp movement to remove a steering wheel.
  6. At installation of a steering wheel to watch the symmetric provision of its spokes.
  7. To fix the lock of a steering wheel.
  8. To tighten a nut of a steering column the moment of 40 N • m.

For removal of a steering wheel at the models which are not equipped with a safety cushion it is necessary to remove the button of a sound signal (1) from lock bolts (3) (carefully, on the right and at the left plastic hooks are located!), to disconnect a wire (2) and to weaken the central nut (shooter).